EPDM Gasket Material

    Description: Ethylene Propylene Diene Monomer (EPDM):
    EPDM is a black plate finish sheet with superior resistance to weathering, ozone and UV exposure.  EPDM also
    provides excellent chemical resistance*, and good electrical properties.  EPDM resists animal and vegetable oils,
    steam, water and oxygenated solvents.  This material meets ASTM D-2000-2BA specifications.

Excellent resistance to UV rays and ozone. Good resistance to Anti-freeze, Synthetic
Detergents, Acetone, Boric acid, Ethanol, Formaldehyde, Mercury, Potassium Sulfate,
Silver Nitrate, Steam (up to 212 Fahrenheit), Saccharin.

    Fills the space between two objects, generally to prevent leakage between the two objects while under
    compression. Gasket material saves money by allowing less precise mating surfaces on machine parts
    which can use gasket material to fill irregularities. Gaskets are commonly produced by cutting from
    sheet gasket materials, such as gasket paper (beater addition), Non-asbestos, Rubber, EPDM, Nitrile,
    Buna, Neoprene, Flexible Graphite, Grafoil, Aflas, Kalrez, Viton, Silicone, Metal, Mica, Felt or a plastic
    polymer such as Teflon® (PTFE), Peek, Urethane, or Ethylene Propylene (EP).  In the past, the gasket
    material selected for specific applications may contain have contained asbestos.
    Chemical Resistance:
Compound: EPDM
Color: Black
Weight:1/16" = .625 lbs per square foot.
Durometer:  45-55 or 55-65
Temperature Range: -40 F to 212 F
Minimum Tensile: 800 PSI
Finish:  Smooth
Minimum Elongation: 300%
Gauges: 1/16", 1/8" ,3/32", 1/4" , 3/8" , 1/2"
Widths: 36" and 48"
PSA: Can be added
Roll Length: 25' to 150'  Short lengths may be available
Information page